7 Best Drivers for a Slice in 2021

Do you have a slice? If so, then you know the pain of watching your ball fly into the woods, water, or worse. It’s frustrating and can put a damper on what would be otherwise an awesome round of golf.

No need to worry, though! If you’re someone who produces a slice frequently off the tee, you may not have the right driver. There are drivers on the market explicitly designed to offset a slice.

This post shows you the best drivers for a slice in 2021 and discusses how to pick the right one for your golf game.

Best Drivers for a Slice in 2021

1. Ping G425 SFT Driver

The Ping G425 SFT is a driver designed for people who have a fierce slice. The SFT in the name stands for Straight Flight Technology. It’s engineered with draw bias, meaning that the center of gravity is shifted towards the clubhead’s heel. This will help bring your errant shots back on-line.

The fixed 23-gram tungsten back weight promotes the right-to-left shot bend of approximately 25 yards, compared to other G425 drivers. While you may lose distance with a sharp slice, the T9S+ forged face helps accelerate your club to add distance back. 

The driver features crown turbulators to reduce aerodynamic drag, which speeds up your golf club. It is an adjustable club, so the hosel can be moved to eight positions to change trajectory and loft. Thanks to the Dragonfly crown technology, the tungsten weights are movable.

You can utilize the Arccos Smart Grips with this driver, as they are the standard grip for the G425.

This is offered in both right-handed and left-handed orientation, and you can choose multiple shafts and flexes. 

2. Wilson Staff Launch Pad Driver

If you’re in the market for a more practically priced option, this is it. The moderate hosel offset, along with the upright lie angle and the more weighted heel, help diminish your slice. Regardless of where you contact the forgiving face, you’ll see high ball speeds and high launch angles.

The total club weight is 272 grams, so it is one of the lightest on the market.

This works well for those with higher swing speeds as well because it has Variable Face technology that can cut through the air.

You can choose multiple flexes and between a 9° and 13° loft. It is not adjustable.

This is more affordable than the other drivers on the list.

3. Callaway Big Bertha B21 Driver

Best High Launch Driver
Callaway Big Bertha B21 Driver
$499.99

Designed to offset a slice. The Flash Face promotes faster ball speeds to make up for the lost distance.

  • Low spin driver head
  • Artificial intelligence to increase forgiveness
  • Internal draw bias weighting
We earn a commission if you make a purchase, at no additional cost to you.
11/01/2021 12:33 pm GMT

People have been using Big Bertha drivers from Callaway since 1991. At the time, it was one of the larger driver heads, providing a bigger area to hit with.

The B21 Driver is specifically designed to help those with a big slice. The head is engineered with draw bias weighting to promote a straighter shot and higher launch angles.

This is the first in Callaway’s line with an ultra-low forward center of gravity to minimize the spin. That means your ball won’t come off sideways and lead to a slice.

The Flash Face promotes faster ball speeds, and it’s spread across a larger area. The launch angle for this is also adjustable, so you can play around with how to get the most out of your drives.

The super-strength materials promote optimal strength and forgiveness while keeping the spin low.

You’ll be able to pick between 45, 55, or 65 gram RCH Graphite shafts and regular, stiff, or light flex settings. 

4. Cleveland Launcher XL Lite Draw Driver

If you’re a younger golfer, your swing speed may be quicker than an older golfer. That doesn’t mean you’re hitting the ball straight, though. Cleveland took its Cleveland Launcher XL head design and combined it with a Lite-weight design to help golfers with moderate swing speeds hit straighter drives.

Built for maximum forgiveness, this has a bonded hosel without the weight-adding adjustability sleeve. Coupled with an ultra-lightweight shaft, the driver is 12g lighter and 0.25″ longer than its adjustable version.

You’ll be swinging it more quickly and adding more distance to your drives. The XL head has the most MOI of any Cleveland driver. The low and deep weighting adds to the high launch to fight against your slice. The less rotation of the club on off-center impacts means that the ball won’t fly as far offline.

Thanks to the design, the energy transferred from the club to the ball is doubled, making the ball spin more.

This driver is also counterbalanced with Action Mass CB, an 8g weight in the grip.

You can customize the flex.

5. Cobra King Radspeed XD Driver

The oversized shape of the Cobra King Radspeed XD Driver makes it easier to catch the ball on the sweet spot. This features heel-biased internal radial weighting with a 10g weight positioned in the heel.

This enables easier face closure as it is a draw-biased design. The T-Bar Speed Chassis design is seven grams lighter, which allowed the makers to position more weight heelward within the frame.

The Carbon Wrap Crown system has a carbon fiber material that is 30% thinner, creating six grams of discretionary weight that can be repositioned.

There are customized choices made to take weight from certain areas of the driver and move them to the heel to create a draw bias driver. The milled area is increased by 95%, thanks to the infinity edge face design. This increases the maximum speed.

6. TaylorMade SiM 2 Max Draw Driver

Best Draw-biased Design
TaylorMade SiM 2 Max Draw Driver
$529.99

A draw-biased driver designed to counteract your slice. The Inertia Generator has been moved closer to the heel to force your slices back straight.

We earn a commission if you make a purchase, at no additional cost to you.
11/01/2021 12:59 pm GMT

Draw-biased drivers tend to promote a right-to-left ball flight at the expense of forgiveness. This does the opposite, thanks to its design. It moved the Inertia Generator closer to the heel to maintain forgiveness despite the draw bias.

It is forged from lightweight and high-strength aluminum and brings together a massive rear weight, a full carbon sole, crown, and a new milled back cup face. The Inertia Generator helps provide faster clubhead speed. 

The ball will jump off of this because of the corrective face curvature, which protects against mishits. It also produces increased ball speeds with the Speed Pocket that provides additional forgiveness on low face hits.

It puts less spin on the ball and is adjustable, so you can pick the loft angle that you prefer. If you aren’t sure how to adjust your TaylorMade SiM Driver, here is a tutorial.

7. Titleist TSi1 Driver

The old Titleist TSi1 Driver was not as draw-biased as this version. Through the process of reshaping the head, the CG was moved closer to the center, allowing for more ball speed than the original.

This will produce more spin than other drivers on this list, but it still only produces mid-spin. It also is only slightly draw-biased, so it’s excellent for those with moderate swing speeds. 

The ATI 425 Aerospace Titanium Face helps it cut through the air to produce more impact. This has high MOI properties to maximize the ball speed, even if you don’t hit it in the center of the club. This features 16 independent loft and lie settings, making it highly customizable. In addition, it has the thinnest titanium crown on the market so that weight can be redistributed.


What to Look for When Buying Drivers for a Slice

If you have a terrible slice, you need a way to compensate for it. Choosing a draw-biased design or an offset design is a start. This will help keep your clubface more closed as you’re coming through the striking zone.

The way that a slice is created is by pushing the ball or creating more left-to-right spin on the ball because your club struck the ball while the face was open. A draw-biased driver takes that out of the equation by being designed with a more closed face.

You can also choose adjustable drivers that allow you to select a higher loft. A higher loft can allow your ball to have less spin on it, meaning it won’t cut through the air as much. That also will diminish the distance a bit. But if you do happen to slice it, it won’t go as far to the right. 

A shorter driver can also help you. Having a shorter shaft can help you meet the sweet spot more consistently. It is less of a club to hit, so there is a shorter arc in your swing. That makes hitting the center of the clubface easier. This is not an all-out fix for your slice, but it can factor in.

Does a Stiff Shaft Help a Slice?

Not necessarily. This is a factor that factors more on your swing speed. If your swing speed is too slow and your shaft is stiff, your ball won’t go as far, and it will slice more. A stiff shaft can absolutely make for straighter shots because the head of the club won’t be dragging behind your ball at the moment of contact. But if you don’t have the correct swing speed for your shaft, you’ll get a low trajectory and a ball that won’t stop running. So you need to measure your swing speed before you choose a flex. 

How Do Draw-biased Drivers Get Rid of a Slice?

As we’ve discussed, draw-biased drivers have moved the weight to the heel of the face. This makes the toe lighter, allowing it to come through faster than the heel. It overcompensates for you opening up your clubface and helps keep it closed as you swing through. This helps eliminate your slice. Draw-biased drivers are designed to be positioned more closed from the onset.

Wrapping It Up and Heading to the Clubhouse

If you’re working to minimize your slice, some drivers can help. Draw-biased and offset designs can overcompensate for your slice and produce straighter drives. A higher loft angle can diminish slicing as well.

Having the right shaft for your swing speed can reduce the number of slices you have off the tee. The technology these days in drivers is the best it has ever been. So rather than struggle off the tee, use the technology that is out there to your advantage.

The best driver for a slice is the PING G425 SFT Driver. Those on a budget should look at the Wilson Launch Pad Driver.

Joe Morelli

Joe's been playing golf for 25 years, starting as a junior golfer in his early teens. He loves getting out on the links with his dad and friends -- whether an early weekend foursome or his weekday, afternoon league.

Recent Posts